On Campus Courses

Energy Auditor

Instructor-led course (203)

Course description

Energy Auditor is based on a National Renewable Energy Laboratory/U.S. Department of Energy Job Task Analysis (JTA) of the same name. This two-week course provides the student with a comprehensive understanding of the auditing process from diagnosing basic energy-related issues to combustion safety testing and developing a work-scope. Students will study how the house works as a system, and learn how to apply building science principles to identify, prioritize, and correct energy-related issues within the building envelope, as well as health and safety concerns associated with these issues. This course is designed to prepare qualified students to take the BPI Home Energy Professional Energy Auditor certification exam.

State-of-the-art technology is used in both the classroom and the labs to provide students with a high quality learning environment. Three diagnostic house labs controlled by iPad technology provide students with a variety of real life scenarios. Students will take one written test, delivered through our Learning Management System (LMS), and three hands-on tests of energy assessment skills. Upon successful completion of these tests, each student receives a certificate of completion.

Course objectives

  • Recognize the different heating systems and fuel types being used
  • Properly perform combustion testing (SSE and WC Draft)
  • Calculate combustion air needed
  • Measure exhaust flow and perform ASHRAE 62.2 calculations
  • Perform duct diagnostic testing
  • Inspect and assess the building envelope
  • Perform basic math calculations
  • Properly gather infiltration data (Blower Door)
  • Use lab experience to give students a practical understanding of the lessons being taught

Skills you'll take home

  • Blower door testing
  • Pressure pan testing
  • Zonal diagnostics
  • Exhaust fan flow verification
  • Client interaction
  • Combustion appliance diagnostics
  • Worst case scenario draft testing
  • Work-scope write-up
  • And much, much more!


This is a lecture-lab course. Topics will be presented in a classroom setting and then followed up with student involvement in the lab. The class will be geared toward little or no previous training in the field. Student participation is very important. Testing for this course will involve both a written and field practical.

Grading criteria and passing score

The exam consists of four sections: one written and three hands-on. All three hands-on sections are timed: 30 minutes for the Blower Door hands-on section, one hour for the CAZ hands-on section, 30 minutes for the Duct Testing hands-on section. Students must pass each section with an 80% score or higher. If a student does not pass a section, he or she will be allowed to retake that particular section in accordance CHP Energy Solutions Research and Training's retesting policy.

Grading plan

  • 105 points(84 points to pass)
    Written Section (delivered via our LMS)
  • 21 points(17 points to pass)
    Blower Door Hands-on Section
  • 35 points(28 points to pass)
    CAZ Hands-on Section
  • 15 points(12 points to pass)
    Duct Tester Hands-on Section

Course topics

  • 0
    Energy Auditor Overview
  • 43
     Collection of Visual, Material, Dimensional, and Appliance Information about the Building for an Energy Audit
  • 21
    Diagnostic Testing of the Dwelling Unit for an Energy Audit 
  • 36
    Evaluation of Collected Energy Audit Data to Determine the Scope of Work 

BPI Continuing Education Units


Course cost


September 9, 2019 at 8:30 am to September 27, 2019 at 3:00 pm

Week 1 and Week 2

Location: 550 Industrial Dr, Christiansburg, VA 24073
Cost: $3,200.00
Credit hours: 64.00
BPI units: 64.00
Space is available

October 14, 2019 at 8:30 am to November 1, 2019 at 4:00 pm

Week 1 and Week 2

Location: 221 S Fayetteville St, Asheboro, NC 27203
Cost: $3,200.00
Credit hours: 64.00
BPI units: 64.00
Space is available

Additional information

Note: The BPI Home Energy Professional Energy Auditor certification is a separate test with an additional fee.

Our Energy Auditor course is approved by the Virginia Department of Professional and Occupational Regulation (DPOR) as an accredited residential building energy analyst training program that satisfies the Virginia energy analyst licensing requirement for education of residential building energy analysts.

To enroll in this course, students must be 18 or older and pass an Energy Auditor prerequisite pre-test which assesses their literacy levels, understanding of basic math, and understanding of basic building science.

If you are a stakeholder and would like to provide feedback about our course, please use the contact form below.

Additional Info

Energy Auditor JTA Document (360 kb)
Energy Auditor JTA Document

Register Now


Contact the Training Center